Plastic Embedding Media & Kits

项目 1 到 50 共 56个

每页
页面:
  1. 1
  2. 2

设置升序顺序
  1. PEG 4000 Resin

    PEG 4000 Resin

    开始于: NT$2,994.00

    This water soluble, nonionic material is used like paraffin to infiltrate and embed tissue. Easily removed from sections with 95% ethanol for immunocytochemical and x-ray microanalytical techniques.

    了解更多
  2. PolyCut-Ease

    PolyCut-Ease

    开始于: NT$2,994.00

    The addition of 1% PolyCut-Ease to any epoxy embedding recipe will enable many stress free sections to be cut from a single area of a knife. It preserves the life of your diamond knife edge as it markedly reduces friction of the knife as it cuts through the plastic. The additive will not change the block color or EM image quality. Does not contain Silicone.

    了解更多
  3. Epoxy Resin Removal Kit

    Epoxy Resin Removal Kit

    开始于: NT$10,361.00

    Quickly removes epoxy resin from thin sections in five minutes under mild conditions preserving delicate immunogenicity of specimens.

    Kit contains: 100ml of solution A and 3ml of solution B

    了解更多
  4. Poly(ethylene glycol) (n) distearate, Flaked

    Poly(ethylene glycol) (n) distearate, Flaked

    开始于: NT$3,660.00

    A removable embedding medium for thin and thick sections. In thicker sections the exterior surface of mitochondria can be observed whereas in resin-embedded thin sections the mitochondria are most frequently observed in a cross section. DGD is used to prepare tissue for immunofluorescent localization of cytoskeletal components. It is also used for tissue preparation for in situ hybridization with nucleic acid probes.

    了解更多
  5. Methyl Methacrylate-Butyl Methacrylate Embedding Kit

    Methyl Methacrylate-Butyl Methacrylate Embedding Kit

    开始于: NT$9,933.00

    Can be used to embed tissue for thin or thick sectioning. By varying butyl methacrylate amount in embedding mix, block hardness is changed. Can be UV catalyzed. For use in electron microscopy.

    了解更多
  6. Methyl Methacrylate Embedding and Casting Kit

    Methyl Methacrylate Embedding and Casting Kit

    开始于: NT$15,922.00

    Resin cures thermally (preferably under pressure) under anaerobic conditions and is capable of producing the highest quality hard, clear, colorless castings.

    了解更多
  7. Unicryl™ Resin

    Unicryl™ Resin

    开始于: NT$17,491.00

    A unique, largely hydrophilic, acrylic resin, developed for universal use in LM and EM applications. When fully polymerized, Unicryl™ demonstrates excellent cutting characteristics. Sectioning surface follows the contours of the tissue during cutting action, producing a highly exposed surface of proteins and nucleic acids for subsequent immunohistochemistry techniques.

    了解更多
  8. Quetol 651 Embedding Kit

    Quetol 651 Embedding Kit

    开始于: NT$11,645.00

    Fast penetrating epoxy embedding medium for EM and LM. Water miscible. Polymerized blocks section easier than in ordinary epoxy resin mixture and show excellent electron image contrast. Acts as a dehydrating agent.

    了解更多
  9. Dodecenylsuccinic anhydride (DDSA)

    Dodecenylsuccinic anhydride (DDSA)

    开始于: NT$1,521.00

    Epoxy hardener, suitable for use in embedding procedures.

    了解更多
  10. Balsam, Canada

    Balsam, Canada

    开始于: NT$4,658.00

    A natural resin used as mounting medium for microscopy.

    了解更多
  11. Poly(ethylene glycol) distearate 400

    Poly(ethylene glycol) distearate 400

    开始于: NT$3,660.00

    A removable embedding medium for thin and thick sections. In thicker sections the exterior surface of mitochondria can be observed whereas in resin-embedded thin sections the mitochondria are most frequently observed in a cross section. DGD is used to prepare tissue for immunofluorescent localization of cytoskeletal components. It is also used for tissue preparation for in situ hybridization with nucleic acid probes.

    MW = Molecular weight of PEG.

    了解更多
  12. Poly(ethylene glycol) distearate 200

    Poly(ethylene glycol) distearate 200

    开始于: NT$3,660.00

    A removable embedding medium for thin and thick sections. In thicker sections the exterior surface of mitochondria can be observed whereas in resin-embedded thin sections the mitochondria are most frequently observed in a cross section. DGD is used to prepare tissue for immunofluorescent localization of cytoskeletal components. It is also used for tissue preparation for in situ hybridization with nucleic acid probes.

    MW = Molecular weight of PEG.

    了解更多
  13. DMP-30

    DMP-30

    开始于: NT$2,091.00

    Curing catalyst for epoxy resins.

    了解更多
  14. Dimethylaminoethanol (DMAE)

    Dimethylaminoethanol (DMAE)

    开始于: NT$2,281.00

    Curing agent for epoxy resins.

    了解更多
  15. Propylene Oxide, EM Grade

    Propylene Oxide, EM Grade

    开始于: NT$1,854.00

    Solvent used in the last stage of dehydration of tissue for epoxy embedding.

    了解更多
  16. Epon® Resin 1001F

    Epon® Resin 1001F

    开始于: NT$3,850.00

    (Bisphenol A diglycidyl ether) WPE: 525-550

    Higher MW epoxy resin cured by amine catalyst, used for embedding.

    了解更多
  17. Epon® Resin 828

    Epon® Resin 828

    开始于: NT$5,418.00

    (Bisphenol A diglycidyl ether) WPE: 185-192

    Epon® Resin 828 is a standard epoxy resin used in formulation, fabrication and fusion technology. Widely used for embedding and potting. When cross-linked or hardened with appropriate amine curing agents, very good mechanical adhesive, dielectric and chemical resistance properties are obtained.

    了解更多
  18. Dibutyltin dilaurate

    Dibutyltin dilaurate

    开始于: NT$6,131.00

    Catalyst for polymerizing lactide and glycolide and isocyanate reactions.

    了解更多
  19. Poly(ethylene glycol) distearate 6,000

    Poly(ethylene glycol) distearate 6,000

    开始于: NT$3,660.00

    A removable embedding medium for thin and thick sections. In thicker sections the exterior surface of mitochondria can be observed whereas in resin-embedded thin sections the mitochondria are most frequently observed in a cross section. DGD is used to prepare tissue for immunofluorescent localization of cytoskeletal components. Also used for tissue preparation for in-situ hybridization with nucleic acid probes.

    MW = Molecular weight of PEG.

    了解更多
  20. Lowicryl® K4M Polar, Hydrophilic, -35ºC embedding kit

    Lowicryl® K4M Polar, Hydrophilic, -35ºC embedding kit

    开始于: NT$25,048.00

    Lowicryl K kits are polar and therefore hydrophilic. During dehydration and infiltration specimens may be kept partially hydrated since polymerization can occur with up to 5% water. Thus immunolabeling with polar kits results in better preservation of structure and antigenicity and lower background labeling.

    了解更多
  21. Lowicryl® K11M Polar, Hydrophilic, -60ºC embedding kit

    Lowicryl® K11M Polar, Hydrophilic, -60ºC embedding kit

    开始于: NT$25,048.00

    Lowicryl® K kits are polar and therefore hydrophilic. During dehydration and infiltration specimens may be kept partially hydrated since polymerization can occur with up to 5% water. Thus immunolabeling with polar kits results in better preservation of structure and antigenicity with lower background labeling.

    了解更多
  22. Spurr Low Viscosity Mini Kit

    Spurr Low Viscosity Mini Kit

    开始于: NT$3,707.00

    Exceptional penetration for tissue, mineral, and dense structures. A low viscosity of 60cps allows easy penetration into a variety of difficult materials. May be used to prepare mineral specimens for polishing.

    了解更多
  23. Spurr Low Viscosity Embedding Kit

    Spurr Low Viscosity Embedding Kit

    开始于: NT$4,786.00

    Exceptional penetration for tissue, mineral, and dense structures. A low viscosity of 60cps allows easy penetration into a variety of difficult materials. May be used to prepare mineral specimens for polishing.

    了解更多
  24. Araldite® 502 kit, Luft's Formula

    Araldite® 502 kit, Luft's Formula

    开始于: NT$3,470.00

    Araldite 502 kit, Luft's Formula overcomes penetration difficulties by using propylene oxide as an additional clearing agent. Permits embedding of tissue from fixation to sectioning in about 24 hours.

    了解更多
  25. Araldite® resins (modified epoxy resins), Grade 502

    Araldite® resins (modified epoxy resins), Grade 502

    开始于: NT$1,568.00

    WPE is Weight Per Epoxide equivalent. From this value, one determines the optimum amount of DDSA or NMA in grams to combine with 100 grams of resin for stoichiometric balance minimizing unreacted starting materials and producing reproducibly stainable, embedding blocks. 了解更多

  26. Araldite® resins (modified epoxy resins), Grade 6005

    Araldite® resins (modified epoxy resins), Grade 6005

    开始于: NT$1,568.00

    WPE is Weight Per Epoxide equivalent. From this value, one determines the optimum amount of DDSA or NMA in grams to combine with 100 grams of resin for stoichiometric balance minimizing unreacted starting materials and producing reproducibly stainable, embedding blocks. The exact WPE value for each lot of Araldite resin is put on the label of each container purchased from Polysciences.

    WPE 182-189

    了解更多
  27. MonoStep™ Lowicryl® K4M Polar Embedding Media

    MonoStep™ Lowicryl® K4M Polar Embedding Media

    开始于: NT$10,884.00

    Pre-mixed, ready to use Lowicyrl MonoStep Embedding Media saves time and minimizes chemical contact. These products are ideal for use in Immunohistochemistry. They are based on our popular Lowicyrl K4M and HM-20 formulations for low temperature embedding or freeze substitution. MonoStep products are especially appropriate for immunolableing resulting in better preservation of antigenicity and lower background labeling.

    了解更多
  28. MonoStep™ Lowicryl® HM20 Non-polar Embedding Media

    MonoStep™ Lowicryl® HM20 Non-polar Embedding Media

    开始于: NT$10,884.00

    Pre-mixed, ready to use Lowicyrl® MonoStep Embedding Media saves time and minimizes chemical contact. These products are ideal for use in Immunohistochemistry. They are based on our popular Lowicyrl® K4M and HM-20 formulations for low temperature embedding or freeze substitution. MonoStep products are expecially appropriate for immunolableing resulting in better preservation of antigenicity and lower background labeling.

    了解更多
  29. Ultra Low Viscosity Embedding Kit

    Ultra Low Viscosity Embedding Kit

    开始于: NT$10,314.00

    ERL-4221 is useful for rapid embedding of materials which are difficult to infiltrate even with Spurr’s resin. Exhibits good sectioning qualities, beam stability, and staining properties. Miscible with alcohol or acetone so propylene oxide can be avoided.

    了解更多
  30. Embed-It™ Low Viscosity Epoxy Kit

    Embed-It™ Low Viscosity Epoxy Kit

    开始于: NT$9,078.00

    A modification of the Spurr's formulation, Embed-It Low Viscosity Epoxy Kit can be used for embedding biological, material and mineralogical samples.

    了解更多
  31. Lowicryl® HM20 Non-polar, Hydrophobic, -70ºC Embedding Kit

    Lowicryl® HM20 Non-polar, Hydrophobic, -70ºC Embedding Kit

    开始于: NT$25,048.00

    Lowicryl® HM kits are non-polar and are used to produce high contrast images of completely unstained thin sections by Z-contrast. Also these HM kits are particularly suitable for dark field observation because of their relatively low density.

    了解更多
  32. Lowicryl® HM23 Non-polar, hydrophobic, -80ºC embedding kit

    Lowicryl® HM23 Non-polar, hydrophobic, -80ºC embedding kit

    开始于: NT$25,048.00

    Lowicryl® HM kits are non-polar and are used to produce high contrast images of completely unstained thin sections by Z-contrast. Also these HM kits are particularly suitable for dark field observation because of their relatively low density.

    了解更多
  33. Batson's #17 Catalyst

    Batson's #17 Catalyst

    开始于: NT$2,614.00

    Batson's #17 Anatomical Corrosion Kit is for ambient temperature preparation of exact anatomical corrosion specimens by injection of liquid plastic. After hardening, the tissue is corroded away by caustic, yielding a durable, scientifically exact model for anatomical study.

    Included in Batson's #17 Anatomical Corrosion Kit Cat. # 07349

    了解更多
  34. Batson's #17 Promoter

    Batson's #17 Promoter

    开始于: NT$2,614.00

    Batson's #17 Anatomical Corrosion Kit is for ambient temperature preparation of exact anatomical corrosion specimens by injection of liquid plastic. After hardening, the tissue is corroded away by caustic, yielding a durable, scientifically exact model for anatomical study.

    Included in Batson's #17 Anatomical Corrosion Kit Cat. # 07349

    了解更多
  35. Batson's #17 Maceration solution

    Batson's #17 Maceration solution

    开始于: NT$2,994.00

    Batson's #17 Anatomical Corrosion Kit is for ambient temperature preparation of exact anatomical corrosion specimens by injection of liquid plastic. After hardening, the tissue is corroded away by caustic, yielding a durable, scientifically exact model for anatomical study.

    Batson's #17 Anatomical Corrosion Kit Cat. # 07349 component.

    了解更多
  36. Batson's #17 Red pigment

    Batson's #17 Red pigment

    开始于: NT$4,183.00

    Batson's #17 Anatomical Corrosion Kit is for ambient temperature preparation of exact anatomical corrosion specimens by injection of liquid plastic. After hardening, the tissue is corroded away by caustic, yielding a durable, scientifically exact model for anatomical study.

    Batson's #17 Anatomical Corrosion Kit Cat. # 07349 component.

    了解更多
  37. Batson's #17 Blue pigment

    Batson's #17 Blue pigment

    开始于: NT$4,183.00

    Batson's #17 Anatomical Corrosion Kit is for ambient temperature preparation of exact anatomical corrosion specimens by injection of liquid plastic. After hardening, the tissue is corroded away by caustic, yielding a durable, scientifically exact model for anatomical study.

    Batson's #17 Anatomical Corrosion Kit Cat. # 07349 component.

    了解更多
  38. Batson's #17 Monomer base solution

    Batson's #17 Monomer base solution

    开始于: NT$10,932.00

    Batson's #17 Anatomical Corrosion Kit is for ambient temperature preparation of exact anatomical corrosion specimens by injection of liquid plastic. After hardening, the tissue is corroded away by caustic, yielding a durable, scientifically exact model for anatomical study.

    了解更多
  39. Batson’s #17 Anatomical Corrosion Kit

    Batson’s #17 Anatomical Corrosion Kit

    开始于: NT$17,633.00

    Low viscosity, acrylic-based resin system for room temperature preparation of anatomical corrosion castings. After hardening, tissue is corroded away by caustic solution, yielding a durable, scientifically exact model for anatomical study.

    了解更多
  40. Batson's #17 White pigment

    Batson's #17 White pigment

    开始于: NT$4,183.00

    Batson's #17 Anatomical Corrosion Kit is for ambient temperature preparation of exact anatomical corrosion specimens by injection of liquid plastic. After hardening, the tissue is corroded away by caustic, yielding a durable, scientifically exact model for anatomical study.

    Batson's #17 Anatomical Corrosion Kit Cat. # 07349 component.

    了解更多
  41. Batson's #17 Green pigment

    Batson's #17 Green pigment

    开始于: NT$4,183.00

    Batson's #17 Anatomical Corrosion Kit is for ambient temperature preparation of exact anatomical corrosion specimens by injection of liquid plastic. After hardening, the tissue is corroded away by caustic, yielding a durable, scientifically exact model for anatomical study.

    Batson's #17 Anatomical Corrosion Kit Cat. # 07349 component.

    了解更多
  42. Batson's #17 Yellow pigment

    Batson's #17 Yellow pigment

    开始于: NT$4,183.00

    Batson's #17 Anatomical Corrosion Kit is for ambient temperature preparation of exact anatomical corrosion specimens by injection of liquid plastic. After hardening, the tissue is corroded away by caustic, yielding a durable, scientifically exact model for anatomical study.

    Batson's #17 Anatomical Corrosion Kit Cat. # 07349 component.

    了解更多
  43. Poly/Bed® 812 Embedding Media

    Poly/Bed® 812 Embedding Media

    开始于: NT$3,279.00

    Polysciences has been the leader in supplying epoxy embedding material to microscopists for many years. Our Poly/Bed® line of products are the reliable, long-established means by which you can be assured of secure specimen embedment. Use Poly/Bed® for your scientific studies requiring beam stability, low shrinkage, and good contrast. Poly/Bed® Epoxy formulations are of lower viscosity then Araldite formulations, and hence provide better penetration into tissue samples.

    Exact WPE number supplied on label, ranging from 140-160.

    Excellent replacement for Epon® 812.

    了解更多
  44. JB-4® Embedding Kit - Catalyst (Benzoyl Peroxide, Plasticized)

    JB-4® Embedding Kit - Catalyst (Benzoyl Peroxide, Plasticized)

    开始于: NT$856.00

    Catalyst (Benzoyl Peroxide, Plasticized) for JB-4® Embedding Kit (Cat. #00226)

    了解更多
  45. JB-4® Embedding Kit - Solution B (Accelerator)

    JB-4® Embedding Kit - Solution B (Accelerator)

    开始于: NT$1,616.00

    Solution B (Accelerator) for JB-4® Embedding Kit (Cat. #00226-1)

    了解更多
  46. JB-4® Embedding Kit

    JB-4® Embedding Kit

    开始于: NT$13,403.00

    Water-soluble, GMA based, plastic resin kit intended for use in the preparation of embedded samples for high resolution light microscopy. Widely used for research and clinical diagnosis.

    了解更多
  47. JB-4 Plus® Embedding Kit - Catalyst (Benzoyl Peroxide, Plasticized)

    JB-4 Plus® Embedding Kit - Catalyst (Benzoyl Peroxide, Plasticized)

    开始于: NT$856.00

    JB-4® Plus offers all the benefits of JB-4® in addition to cooler acting accelerator system for greater protection of tissue components and yields crystal clear non-yellowing blocks. The blocks resulting from JB-4® Plus are ideal for processing dense material such as bone.

    了解更多
  48. JB-4 Plus® Embedding Kit - Solution A (Monomer)

    JB-4 Plus® Embedding Kit - Solution A (Monomer)

    开始于: NT$8,935.00

    JB-4® Plus offers all the benefits of JB-4® in addition to cooler acting accelerator system for greater protection of tissue components and yields crystal clear non-yellowing blocks. The blocks resulting from JB-4® Plus are ideal for processing dense material such as bone.

    了解更多
  49. JB-4® Mini Embedding kit

    JB-4® Mini Embedding kit

    开始于: NT$2,852.00

    A pre-measured and ready-to-use version of the JB-4® Kit.

    Kit Contains: 2 - 40ml Embedding Solution A, 2ml Embedding Solution B, and 0.50g Benzoyl Peroxide Plasticized in small bottles.

    了解更多
  50. JB-4 Plus® Embedding Kit - Solution B (Accelerator)

    JB-4 Plus® Embedding Kit - Solution B (Accelerator)

    开始于: NT$2,567.00

    JB-4® Plus offers all the benefits of JB-4® in addition to cooler acting accelerator system for greater protection of tissue components and yields crystal clear non-yellowing blocks. The blocks resulting from JB-4® Plus are ideal for processing dense material such as bone.

    了解更多
页面:
  1. 1
  2. 2