Polyethylene BEEM^® embedding capsules are the most commonly used embedding capsules for all types of resins. The embedding block requires little or no trimming. The closed capsules are UV transparent for polymerization of acrylic resins.

Dimensions: 8 mm ID x 20 mm High

For holding capsules upright during polymerization. Holds 22 capsules in numbered cavities. Made from an epoxy resistant material that embedding media will not stick to. Also suitable for gelatin capsules. Cavities may be illuminated from below to facilitate specimen orientation.

A self supporting unit of 10 size 00 conical end capsules in numbered positions for economical embedding. The Capsules are self supporting and do not require additional holders. The mold is made from polyethylene and gives pre-shaped blocks with 1mm square tips similar to BEEM^®.

Economical and convenient method for producing resin blocks. UV transparent,ideal for UV Polymerization of acrylic resins. Can be used with most resins. Capsules have snap-shut lids which cannot slide off accidentally. Capsules are also useful for storing grids and TEM calibration specimens.

Dimensions: 23.3mm long x 8.18mm wide; 0.95ml volume

Economical and convenient method for producing resin blocks. UV transparent,ideal for UV Polymerization of acrylic resins. Can be used with most resins. Capsules have snap-shut lids which cannot slide off accidentally. Capsules are also useful for storing grids and TEM calibration specimens.

Dimensions: 19.0mm long x 6.63mm wide; 0.50ml volume

Economical and convenient method for producing resin blocks. UV transparent,ideal for UV Polymerization of acrylic resins. Can be used with most resins. Capsules have snap-shut lids which cannot slide off accidentally. Capsules are also useful for storing grids and TEM calibration specimens.

Dimensions: 13.9mm long x 5.05mm wide; 0.21ml volume

Manufactured from transparent polyethylene. Useful for embedding media such as JB-4, glycol methacrylate and other methacrylates which do not polymerize well in conventional silicone rubber molds. The transparency of the mold permits accurate specimen orientation when illuminated from below. The molds are flexible and reusable.

Resistant to most chemicals and acids used in processing. Provides three compartments for average size specimens and a removable divider for larger(34mm) specimens. They are weighted to assume upright position for complete exposure during processing.

12 pieces per carton

Polyethylene BEEM^® embedding capsules are the most commonly used embedding capsules for all types of resins. The embedding block requires little or no trimming. The closed capsules are UV transparent for polymerization of acrylics. In addition to the two standard 3 and 00 sizes, we have the conical and bottle-necked 00 sized designs for centrifuged material embedding. These capsules can withstand up to 600 G. Be sure to use our capsule holders and capsule press for convenient use of these versatile capsules.

Dimensions: 5.6 mm ID x 14 mm High