Epoxy hardener, suitable for use in embedding procedures.

A removable embedding medium for thin and thick sections. In thicker sections the exterior surface of mitochondria can be observed whereas in resin-embedded thin sections the mitochondria are most frequently observed in a cross section. DGD is used to prepare tissue for immunofluorescent localization of cytoskeletal components. It is also used for tissue preparation for in situ hybridization with nucleic acid probes.

MW = Molecular weight of PEG.

Polyethylene BEEM^® embedding capsules are the most commonly used embedding capsules for all types of resins. The embedding block requires little or no trimming. The closed capsules are UV transparent for polymerization of acrylic resins.

Dimensions: 8 mm ID x 20 mm High

Unique Formula for Softening Difficult to Cut Tissue in Paraffin

Effective on bone, nails and tissue. Easy to use, just soak pre-trimmed block surface in Soft Block for 5-15 minutes (depending on tissue sample size) and cut sections.

Xylene free paraffin repellent. Used to create a protective coating on surfaces exposed to paraffin as well as to clean adhering paraffin off laboratory counterparts and equipment. PolyGuard will help keep your equipment and countertops clean and tidy.

Available in 120ml bottles and cases of 6x120ml

Use in place of normal or distilled water for water bath when cutting paraffin sections and pick up wrinkle free ribbons and sections on the slide. Changes the water surface tension so tissue spreads evenly without wrinkles when using paraffin that is of lower quality than the polymer fortified paraffins on the market.

For holding capsules upright during polymerization. Holds 22 capsules in numbered cavities. Made from an epoxy resistant material that embedding media will not stick to. Also suitable for gelatin capsules. Cavities may be illuminated from below to facilitate specimen orientation.

Solution A (Monomer) for JB-4^® Embedding Kit (Cat. # 00226)

Convenient transport container for up to 6 paraffin blocks. Made of transparent PVC for easy viewing of contents. Suitable for all regular models of tissue and biopsy cassettes.

A modification of the Spurr's formulation, Embed-It™ Low Viscosity Epoxy Kit can be used for embedding biological, material and mineralogical samples.

Easy to store plastic block holders for resin. Matte surface for easy marking and a large center hole to prevent bubble formation. Block Holders fit securely onto molding cup tray cavities. Attach to Polysciences' reusable chucks designed for commonly used microtomes.

Available in a bag of 50.

PolyPress™ Tissue Embedding Tampers  aid in the orientation of tissue samples during embedding. The handle height is ideal for use with or with out the use of forceps.

PolyPress™ Tissue Embedding Tampers aid in the orientation of samples during embedding. The handle height is ideal for use with or without the use of forceps.

WPE is Weight Per Epoxide equivalent. From this value, one determines the optimum amount of DDSA or NMA in grams to combine with 100 grams of resin for stoichiometric balance minimizing unreacted starting materials and producing reproducibly stainable, embedding blocks.

Batson's #17 Anatomical Corrosion Kit is for ambient temperature preparation of exact anatomical corrosion specimens by injection of liquid plastic. After hardening, the tissue is corroded away by caustic, yielding a durable, scientifically exact model for anatomical study.

Included in Batson's #17 Anatomical Corrosion Kit Cat. # 07349

Batson's #17 Anatomical Corrosion Kit is for ambient temperature preparation of exact anatomical corrosion specimens by injection of liquid plastic. After hardening, the tissue is corroded away by caustic, yielding a durable, scientifically exact model for anatomical study.

Included in Batson's #17 Anatomical Corrosion Kit Cat. # 07349

Batson's #17 Anatomical Corrosion Kit is for ambient temperature preparation of exact anatomical corrosion specimens by injection of liquid plastic. After hardening, the tissue is corroded away by caustic, yielding a durable, scientifically exact model for anatomical study.

Batson's #17 Anatomical Corrosion Kit Cat. # 07349 component.

Batson's #17 Anatomical Corrosion Kit is for ambient temperature preparation of exact anatomical corrosion specimens by injection of liquid plastic. After hardening, the tissue is corroded away by caustic, yielding a durable, scientifically exact model for anatomical study.

Batson's #17 Anatomical Corrosion Kit Cat. # 07349 component.

Batson's #17 Anatomical Corrosion Kit is for ambient temperature preparation of exact anatomical corrosion specimens by injection of liquid plastic. After hardening, the tissue is corroded away by caustic, yielding a durable, scientifically exact model for anatomical study.

Batson's #17 Anatomical Corrosion Kit Cat. # 07349 component.

Batson's #17 Anatomical Corrosion Kit is for ambient temperature preparation of exact anatomical corrosion specimens by injection of liquid plastic. After hardening, the tissue is corroded away by caustic, yielding a durable, scientifically exact model for anatomical study.

Low viscosity, acrylic-based resin system for room temperature preparation of anatomical corrosion castings. After hardening, tissue is corroded away by caustic solution, yielding a durable, scientifically exact model for anatomical study.

Batson's #17 Anatomical Corrosion Kit is for ambient temperature preparation of exact anatomical corrosion specimens by injection of liquid plastic. After hardening, the tissue is corroded away by caustic, yielding a durable, scientifically exact model for anatomical study.

Batson's #17 Anatomical Corrosion Kit Cat. # 07349 component.

A revolutionary product for every work station in your lab. Our Total Cutting Solution Kit provides you with 5 tissue cutting solutions to address decalcification issues and difficult tissue blocks & specimens. Don’t let poor processing and paraffin issues stop you in the middle of your cutting track record. Reduce bottlenecks in your workflow by using the 10 multi-well tissue block holders provided with the kit right at your cutting station!

Developed to assist histologists with bloody specimens such as placental fragments, bone marrow biopsies, liver, spleen and endometrial curretings which tend to harden after processing and dry out. These tissues, when set on ice tend to shatter and flake leaving blood fragments all over the work area, microtome, waterbath and have a high potential for creating extraneous tissue “floaters” on slides.

Unique Formulation to Soften Keratin

Made for very hard complex keratinized hair, nail and skin samples common in Mohs Histology laboratories. Hair, nail and skin samples that have been processed tend to flex and turn becoming difficult to cut and hold on slides for staining.

Polyethylene BEEM^® embedding capsules are the most commonly used embedding capsules for all types of resins. The embedding block requires little or no trimming. The closed capsules are UV transparent for polymerization of acrylics. In addition to the two standard 3 and 00 sizes, we have the conical and bottle-necked 00 sized designs for centrifuged material embedding. These capsules can withstand up to 600 G. Be sure to use our capsule holders and capsule press for convenient use of these versatile capsules.

Dimensions: 5.6 mm ID x 14 mm High

A self supporting unit of 10 size 00 conical end capsules in numbered positions for economical embedding. The Capsules are self supporting and do not require additional holders. The mold is made from polyethylene and gives pre-shaped blocks with 1mm square tips similar to BEEM^®.

Economical and convenient method for producing resin blocks. UV transparent,ideal for UV Polymerization of acrylic resins. Can be used with most resins. Capsules have snap-shut lids which cannot slide off accidentally. Capsules are also useful for storing grids and TEM calibration specimens.

Dimensions: 23.3mm long x 8.18mm wide; 0.95ml volume

Economical and convenient method for producing resin blocks. UV transparent,ideal for UV Polymerization of acrylic resins. Can be used with most resins. Capsules have snap-shut lids which cannot slide off accidentally. Capsules are also useful for storing grids and TEM calibration specimens.

Dimensions: 19.0mm long x 6.63mm wide; 0.50ml volume

Economical and convenient method for producing resin blocks. UV transparent,ideal for UV Polymerization of acrylic resins. Can be used with most resins. Capsules have snap-shut lids which cannot slide off accidentally. Capsules are also useful for storing grids and TEM calibration specimens.

Dimensions: 13.9mm long x 5.05mm wide; 0.21ml volume

Manufactured from transparent polyethylene. Useful for embedding media such as JB-4, glycol methacrylate and other methacrylates which do not polymerize well in conventional silicone rubber molds. The transparency of the mold permits accurate specimen orientation when illuminated from below. The molds are flexible and reusable.

The design of this mold allows up to 16 tissue samples to be sectioned both on lateral and transverse planes without re-embedding.

Disposable base molds offer ease and convenience. Inexpensive enough to be discarded after use, yet strong enough to be reused. They offer excellent thermal exchange, and have a smooth interior finish and rounded corners to facilitate specimen removal. Made of PVC.

Disposable base molds offer ease and convenience. Inexpensive enough to be discarded after use, yet strong enough to be reused. They offer excellent thermal exchange, and have a smooth interior finish and rounded corners to facilitate specimen removal. Made of PVC.

Disposable base molds offer ease and convenience. Inexpensive enough to be discarded after use, yet strong enough to be reused. They offer excellent thermal exchange, and have a smooth interior finish and rounded corners to facilitate specimen removal. Made of PVC.

Disposable base molds offer ease and convenience. Inexpensive enough to be discarded after use, yet strong enough to be reused. They offer excellent thermal exchange, and have a smooth interior finish and rounded corners to facilitate specimen removal. Made of PVC.

Polysciences offers an extensive line of embedding molds for a large variety of histological and general microscopy applications.

20 Shaped cavities plus 8 oblong (two large, one small) cavities 3.5mm wide in three different lengths.

Mold size 113 x 17mm

Resistant to most chemicals and acids used in processing. Provides three compartments for average size specimens and a removable divider for larger(34mm) specimens. They are weighted to assume upright position for complete exposure during processing.

12 pieces per carton

Easy to use and saves time - Unique design will Peel-A-Way from a solidified embedded block. There is no need for trimming. Can be used with Micro-Cut paraffin, JB-4, GMA, Osteo-Bed and MMA embedding resins.

Disposable paraffin molds designed to "Peel-A-Way" from the solidified embedded block.

Disposable paraffin molds designed to "Peel-A-Way" from the solidified embedded block.

Disposable paraffin molds designed to "Peel-A-Way" from the solidified embedded block.

Disposable paraffin molds designed to "Peel-A-Way" from the solidified embedded block.

Disposable paraffin molds designed to "Peel-A-Way" from the solidified embedded block.

For JB-4, JB-4 Plus, Immunobed, LR-White, LR-Gold or Paraffin embedding. This is an embedding system of reusable molds and trays with colored stubs.

Polysciences offers an extensive line of embedding molds for a large variety of histological and general microscopy applications. If you need help in selecting the best mold for your applications, please call us for a suggestion.

For JB-4, JB-4+, Immunobed, LR-White, LR-Gold, or Paraffin embedding. This is an embedding system of reusable molds and trays with colored stubs.

For JB-4, JB-4 Plus, Immunobed, LR-White, LR-Gold or Paraffin embedding. This is an embedding system of reusable molds and trays with colored stubs.

Polysciences offers an extensive line of embedding molds for a large variety of histological and general microscopy applications. If you need help in selecting the best mold for your applications, please call us for a suggestion.

For JB-4, JB-4+, Immunobed, LR-White, LR-Gold, or Paraffin embedding. This is an embedding system of reusable molds and trays with colored stubs.

For JB-4, JB-4+, Immunobed, LR-White, LR-Gold, or Paraffin embedding. This is an embedding system of reusable molds and trays with colored stubs

For JB-4, JB-4+, Immunobed, LR-White, LR-Gold, or Paraffin embedding. This is an embedding system of reusable molds and trays with colored stubs.

Light-weight, durable plastic trays, ideal for resin molding specimen blocks with JB-4 and other resins. Use in conjunction with Polysciences' popular block holders and chucks.

Light-weight, durable plastic trays, ideal for resin molding specimen blocks with JB-4 and other resins. Used in conjunction with Polysciences' popular and inexpensive block holders and chucks.

Set of 3 - 2 x15x5mm (9 cavities)

Light-weight, durable plastic trays, ideal for resin molding specimen blocks with JB-4 and other resins. Used in conjunction with Polysciences' popular and inexpensive block holders and chucks.

Set of 3 - 13x19x5mm (9 cavaties)

Light-weight, durable plastic trays, ideal for resin molding specimen blocks with JB-4 and other resins. Used in conjunction with Polysciences' popular block holders and chucks.

Set of 3 - 6mm x 8mm x 5mm hexagon (9 cavities)

Polysciences offers an extensive line of embedding molds for a large variety of histological and general microscopy applications. If you need help in selecting the best mold for your applications, please call us for a suggestion.

For use with Epoxy Resins for large or odd shaped specimens. The embedded blocks are 14mm in diameter. Up to six blocks per mold.

Polysciences offers an extensive line of embedding molds for a large variety of histological and general microscopy applications. If you need help in selecting the best mold for your applications, please call us for a suggestion.

For use with Epoxy Resins, this is our most popular mold. A flexible silicon rubber mold which releases up to 21 blocks by flexing. It is reusable and can be used to store material prior to sectioning. The mold is ideal for brain and lung tissue orientation.

The 21 cavaties are 5mm x 12mm x 4mm deep.

Polysciences offers an extensive line of embedding molds for a large variety of histological and general microscopy applications. If you need help in selecting the best mold for your applications, please call us for a suggestion.

This mold is produced from opaque or translucent silicone rubber. Molds are durable and flexible and have 21 consecutively numbered shaped cavities. They have high thermal and chemical resistance.

The 21 cavities are 5mm x 12mm x 4mm. The mold is 69mm x 90mm.

Catalyst (Benzoyl Peroxide, Plasticized) for JB-4^® Embedding Kit (00226)

Solution B (Accelerator) for JB-4^® Embedding Kit (Cat. #00226-1)

Water-soluble, GMA based, plastic resin kit intended for use in the preparation of embedded samples for high resolution light microscopy. Widely used for research and clinical diagnosis.

JB-4^® Plus offers all the benefits of JB-4^® in addition to cooler acting accelerator system for greater protection of tissue components and yields crystal clear non-yellowing blocks. The blocks resulting from JB-4^® Plus are ideal for processing dense material such as bone.

JB-4^® Plus offers all the benefits of JB-4® in addition to cooler acting accelerator system for greater protection of tissue components and yields crystal clear non-yellowing blocks. The blocks resulting from JB-4^® Plus are ideal for processing dense material such as bone.

A pre-measured and ready-to-use version of the JB-4^® Kit.

Kit Contains: 2 - 40ml Embedding Solution A, 2ml Embedding Solution B, and 0.50g Benzoyl Peroxide Plasticized in small bottles.

JB-4^® Plus offers all the benefits of JB-4^® in addition to cooler acting accelerator system for greater protection of tissue components and yields crystal clear non-yellowing blocks. The blocks resulting from JB-4^® Plus are ideal for processing dense material such as bone.

A unique polymer embedding system that gives a higher level of morphological detail than paraffin processed tissues.

Exceptional penetration for tissue, mineral, and dense structures. A low viscosity of 60cps allows easy penetration into a variety of difficult materials. May be used to prepare mineral specimens for polishing.

Lowicryl K kits are polar and therefore hydrophilic. During dehydration and infiltration specimens may be kept partially hydrated since polymerization can occur with up to 5% water. Thus immunolabeling with polar kits results in better preservation of structure and antigenicity and lower background labeling.

Lowicryl^® HM kits are non-polar and are used to produce high contrast images of completely unstained thin sections by Z-contrast. Also these HM kits are particularly suitable for dark field observation because of their relatively low density.

Lowicryl^® HM kits are non-polar and are used to produce high contrast images of completely unstained thin sections by Z-contrast. Also these HM kits are particularly suitable for dark field observation because of their relatively low density.

Lowicryl^® K kits are polar and therefore hydrophilic. During dehydration and infiltration specimens may be kept partially hydrated since polymerization can occur with up to 5% water. Thus immunolabeling with polar kits results in better preservation of structure and antigenicity with lower background labeling.

Pre-mixed, ready to use Lowicyrl MonoStep Embedding Media saves time and minimizes chemical contact. These products are ideal for use in Immunohistochemistry. They are based on our popular Lowicyrl K4M and HM-20 formulations for low temperature embedding or freeze substitution. MonoStep products are especially appropriate for immunolableing resulting in better preservation of antigenicity and lower background labeling.

Pre-mixed, ready to use Lowicyrl® MonoStep Embedding Media saves time and minimizes chemical contact. These products are ideal for use in Immunohistochemistry. They are based on our popular Lowicyrl® K4M and HM-20 formulations for low temperature embedding or freeze substitution. MonoStep products are expecially appropriate for immunolableing resulting in better preservation of antigenicity and lower background labeling.

Reusable aluminum chuck supplied complete with thumbscrew. Designed for use with our Plastic Block Holders (Cat. #15899) and molding trays.

Reusable chucks designed to be used with Polysciences Plastic Block Holders Cat.# 15899 and molding trays. Available for a range of microtomes.

This water soluble, nonionic material is used like paraffin to infiltrate and embed tissue. Easily removed from sections with 95% ethanol for immunocytochemical and x-ray microanalytical techniques.

Quickly removes epoxy resin from thin sections in five minutes under mild conditions preserving delicate immunogenicity of specimens.

Kit contains: 100ml of solution A and 3ml of solution B

Curing agent for epoxy resins.

Can be used to embed tissue for thin or thick sectioning. By varying butyl methacrylate amount in embedding mix, block hardness is changed. Can be UV catalyzed. For use in electron microscopy.

Resin cures thermally (preferably under pressure) under anaerobic conditions and is capable of producing the highest quality hard, clear, colorless castings.

Catalyst for polymerizing lactide and glycolide and isocyanate reactions.

A removable embedding medium for thin and thick sections. In thicker sections the exterior surface of mitochondria can be observed whereas in resin-embedded thin sections the mitochondria are most frequently observed in a cross section. DGD is used to prepare tissue for immunofluorescent localization of cytoskeletal components. Also used for tissue preparation for in-situ hybridization with nucleic acid probes.

MW = Molecular weight of PEG.

Suitable for use with large and small mineralized (undecalcified) bone sections. Yields clear, hard blocks for cutting sections with a heavy duty microtome. Osteo-Bed solvent is available to remove plastic from sections for brilliant staining. Not water-soluble.

Suitable for use with large and small mineralized (undecalcified) bone sections. Yields clear, hard blocks for cutting sections with a heavy duty microtome. Osteo-Bed solvent is available to remove plastic from sections for brilliant staining. Not water-soluble.

Component of Osteo-Bed Bone Embedding Kit Cat. #17734

Formulated for embedding large and small mineralized (undecalcified) bone specimens.

Osteo-Bed Plus Embedding Kit offers the same benefits as Osteo-Bed Bone Embedding Kit with the added benefit of producing much harder blocks for supporting undecalcified bone specimens and bone containing metal implants, grafts and stents.

Allows for infiltration, embedding, sectioning and filling steps to be done with a single specimen container. Plastic lid and base are resistant to solvents, microwaving techniques & decalcifying solution. Universal size fits all popular base molds and may be used with stainless steel process covers. Unique patented design permits maximum fluid exchange and drainage.

Dimensions: 32mm L x 26mm W x 5mm D

Allows for infiltration, embedding, sectioning and filling steps to be done with a single specimen container. Plastic lid and base are resistant to solvents, microwaving techniques & decalcifying solution. Universal size fits all popular base molds and may be used with stainless steel process covers. Unique patented design permits maximum fluid exchange and drainage.

Dimensions: 32mm L x 26mm W x 5mm D

Allows for infiltration, embedding, sectioning and filling steps to be done with a single specimen container. Plastic lid and base are resistant to solvents, microwaving techniques & decalcifying solution. Universal size fits all popular base molds and may be used with stainless steel process covers. Unique patented design permits maximum fluid exchange and drainage.

Dimensions: 32mm L x 26mm W x 5mm D

PolyPress™ Tissue Embedding Tampers aid in the orientation of samples during embedding. The two sizes combined in one pack provide the necessary options when embedding various sized tissues.

Paraffin wax is an embedding medium for the preservation and preparation of tissue samples for microscopic examination. Derived from petroleum, paraffin wax is a colorless, odorless substance with a low melting point.

Paraffin wax is an embedding medium for the preservation and preparation of tissue samples for microscopic examination. Derived from petroleum, paraffin wax is a colorless, odorless substance with a low melting point.